Introduction
It is composed of one or more standard high-speed filtration units. Raw water flows through the internal water distributor and water collector, using different media to effectively remove particles and reduce turbidity. Equipped with specific filter media (such as activated carbon and so on), it can also adsorb organic matter and ions. The filter unit ranges from 16"(400mm) to 96" (2400mm) in size with multiple installation options, and can work as an independent system or connect to existing water pumps and public pipelines, realizing unlimited capacity expansion.
Working Principle
When in filtration state, pressurized water enters the water distribution system uniformly and reaches the filter media layer. Suspended solids are intercepted, and clean water is collected and discharged. As impurities accumulate, pressure loss increases; when reaching the set threshold or cleaning time, the system automatically switches to backwash mode. Pressurized water enters the filter layer through the water collector, flushing out pollutants for at least 2 minutes, then automatically returns to filtration mode.
Features
Supports manual, semi-automatic and fully automatic three backwash modes, which can be triggered by manual buttons, PLC, pressure difference or management system.
Adjustable backwash cycle, factory-set to 3 minutes, and can be controlled by DCS automatic filter control system or PLC for remote communication.
Wide size range from 16" to 96", with flexible installation and capacity expansion.
Can be equipped with specific filter media to adsorb organic matter and ions, realizing multi-functional purification.
Automatic backwashing without manual intervention, ensuring continuous water supply.
Advantages
Large processing capacity and modular design, suitable for large-scale water treatment systems.
Automatic backwashing function, low labor cost and stable operation.
High filtration efficiency, effectively removing particles, turbidity and organic matter.
Compact structure, small footprint and strong adaptability to different working conditions.
Core components are imported, with single-gun design for better backwash effect and lower sand run-off rate.
Water collector can be made of stainless steel or ABS material for longer service life.
Application
Industrial process water: Nozzle, heat exchange station water protection filtration.
Industrial circulating water: Iron and steel, metallurgy, paper making, electric power, petrochemical, food and air conditioning industries.
Raw water treatment: Surface water, river water, lake water and seawater.
Irrigation filtration: Farmland, park, municipal and golf course water.
Water industry: Swimming pool and water park water filtration.
